Archive for August, 2009

Sand sculpting… amazing!

August 30, 2009

So after my sand models I wasn’t really sure where to take it next. It was suggested that I look into professional sand sculpting. WOW these model makers are amazing! They create such intricate design out of sand (with a limited amount of time).

I really wanted to find out what additives they were using in the sand mixture. This is a lot harder to find then i first thought because it is banned in most professional competitions. Nowadays they just use sand and water. I heard it may be a mixture of Gelatin and salt. Others say its concrete mixed with sand. But it’s my mission to find out exactly what they use. Why? Because if I can get my hand on some I will be building massive sand sculptures and skate obstacles… And making them permanent features! I will mix in way too much hardener and sculpt myself a bench. I could leave it as- is. Or I can take that design and cast myself a mould out of concrete of plaster. Could you imagine building a piece of sand furniture that hardens, and then you pick it up and take it home.

The best sand to use is sand from a river bed because it has larger triangular grains that stick together. (River = No waves!) Beach sand is not the best because the grains are rounded and smooth. This is because the waves and tides have been crashing down causing the grains to wear down over hundreds (millions?) of years.

hope

solo_1st

Believe it or not but they plant explosives in these sculptures as they build them. When the competition is over… BOOM!  And I thought kicking over a sand castle was fun.

Pound- up process. Building the frames up virtically.

Pound- up process. Building the frames up vertically. Usually done the day before a competition.

They use a method called ‘Pound-up’. It basically involves building a framework out of timber. These timber walls are built up vertically until it reaches a desired height. Each section is filled with sand and is then compacted down by whacking it, jumping on it or pouring water on it. (machinery can be used to compact the sand as well.)

This is a very interesting process that I will look into further.

Beach trip #2

August 30, 2009

Went to St Kilda beach again- this time with Hailey. Booked a video camera and got some footage of the model making process. Luckily it was a nice sunny day this time. I was aiming to build 1 larger model, rather than 5 small models. This time I was using the beach as a landscape and designed the model as an extension of the sea shore. It felt a bit like “landscape sculpting” more than anything. I wasn’t trying to include seating areas into this model. It was purely about form, material, and location. We had a few interested people stop and ask a few question. We also had to protect our models from dogs running along the beach. There was no way I was spending 1 hour on a model to have a dog kick it over in 3 seconds.

model about 3m long

model about 3m long

blog sand 02

A passer-by told me that the St Kilda council Finally approved  the plans to build a skate park in St Kilda. It will be located along the esplanade.  Horay to that!

I will be editing the footage and hopefully putting it up on youtube soon.

The quest for Bockingford

August 30, 2009

I bought some water colour paper for some more paintings- Arches water colour 185gsm, 100% cotton. I was looking for Bockingford paper but the art shop ran out of pads. I tried using more water with the paint this time and I also wet the whole piece of paper before painting. It created interesting effects with the texture of the paper but there wasn’t much else I could get from this medium in terms of form design. It was good to experiment and try different tools and mediums but I don’t think I’ll need to paint much more. The 3-d model making seems to be the best option to continue with.

Drying the paper with a hair dryer.

Drying the paper with a hair dryer.

Beach trip

August 30, 2009

I still needed a quick way to make 3D models that would help me generate new ideas.   So I booked a camera and took a trip to  St Kilda beach. Unfortunately it was raining so it wasn’t the most pleasant trip, however it did make the sand moist and easy to handle.  Sand is good for a number of reasons-

  • can produce crude models in short amount of time/ document it and destroy it.
  • only 1 -3 tools needed ( bucket,  small shovel & water)
  • there is an abundance of sand
  • and its free!
tools

tools

blog sand 01

blog sand 03

Clay models

August 30, 2009

After painting I think it’s time to start getting a bit more hands on. I bought some children’s clay and started modelling. At first I was finding it hard to work with the clay because it was a fairly hard consistency. I was also taking the wrong approach. I was starting to carve into a solid block of clay. I stumbled across a new way of modelling by accident.  I was rolling the clay out into a flat sheet with a rolling pin. As I turned around to put some music on my computer I just through the clay down on the bench and it landed like this….

blog clay 01

And so it began.

blog clay 02-2

blog clay 04

blog clay 03

blog clay 05

Stretch the arms, legs & mind

August 30, 2009

I started painting ideas instead of sketching them. I used large A2 paper and some acrylic paint mixed with a some of water. I was letting the colours and grey tones do the talking. The texture of the paper, the width of the brush and the consistency the paint were bringing out new ideas and forms; rather than me creating them in my head and trying to sketch them.

outdoors painting easel

outdoors painting easel

painting02

After the paint had dried I sketched and annotated some ideas over the top with a pen.

painting03

Inspired

August 30, 2009

Before I  got started I was in need of some inspiration. I found these images of people skating different obstacles.

The Great Petition Sculpture- Burston Reserve, Melbourne

The Great Petition Sculpture- Burston Reserve, Melbourne

Rolled steel was used to create this sculpture.

I found a video that shows the meaning behind this sculpture and the design process (including fabrication). It’s really quite interesting.

http://www.arts.vic.gov.au/content/Public/About_Us/Major_Projects_and_Initiatives/Great_Petition_-_Centenary_of_Womens_Suffrage_Artwork/Creation_of_the_citeGreat_Petitioncite_Sculpture.aspx

Another Problem with street skating and urban design is the Cultural Significance of the location or obstacle your skating. Skaters may or may-not know what the obstacle was designed for (unless they read the plaque). And so you get a lot of skateboarders damaging sensitive sites around the CBD. Moreover, it is also seen as disrespectful when you skate at a location that is valued highly by individuals. Some examples include Lincoln Square (Swanston st) that is now a memorial for the Bali bombing victims. Churches and any other location with religious meaning. The ‘great petition sculpture’ represents women’s rights.

So to stick a bunch of anti-skate products on one of these “sacred” obstacles would detract from the meaning of the obstacle itself. And this is something skaters unfortunately take advantage of.  I would like to design an obstacle that avoids this issue.  The last thing I want is for the skater using my obstacle to be called insensitive vandal.

Skateparsk in the states

concrete bowl

concrete bowl

Semester 2 begins

August 29, 2009
sketch 1

The embankment (aka. "bank") seat

sketch 2

U bench

At first I started sketching out some ideas.  But  it was decided that sketching was not working for several reasons.

1. The medium was too restrictive. The act of sketching in a room with a pencil and paper was not working.  It was preventing me from coming up with new ideas.

2. The concepts and forms that I would like to be producing wernt sketchable. The forms were so organic and fluid that even 3-d sketching wasn’t doing justice.

(Although there was a particular concept of seating that I liked and continued to work with in different ways)

3. Time- Sketching was time consuming. I needed to find a medium that allowed me to develop new concepts very quickly.