Posts Tagged ‘barrel waves’

The Barrel on site

September 26, 2009

So I chose Birrarung Marr for the site of this obstacle. I wanted to put this in clear view so people could see it from different angles. It’s along a main path…but I didn’t want to block the path or make people walk around the obstacle. That’s why I decided to go with an obstacle that could be approached from different directions.

The obstacle can also be approached from the back. There is a large hill that nobody really walks down. So I figured this could be used by bike riders to gain speed. The ramps at the back of obstacle can only be ridden by BMX bikes as it is grassy and skaters can’t ride over grass.

There is a seat at the front of the obstacle. It’s facing the river and can people can sit alongside the path. It’s not intended to be skated and is protected by an upward lip that prevents skateboards from flying over and hitting pedestrians.

Front view of the barrel wave at Birrarung Marr

Front view of the barrel wave at Birrarung Marr

Side view showing BMX biker ridng over the spine ramp (approaches from the hill)

Side view showing BMX biker ridng over the spine ramp (approaches from the hill)

I’ll need to change some curves as you can see in the side elevation. The curves are too steep behind the seating area. The scale also needs to be changed as well. I will be making these minor changes in CAD. A concrete foundation is also needed.

The Barrel Wave

September 26, 2009

After making lots of smaller wire mesh and clay models, it was time to play around with scale. The scale was going to be crucial in terms of the functionality to the design. It also determined WHO used it and how experienced they were. I’m making this object for people with 3 different skill levels, so I had to control certain parts of the design. The obstacle can be approached in 3 different directions according to skill level and according to your mode of transport; skateboard, BMX bike, roller blades and scooter.

My research and design development stages have involved the beach in some way or form. The sand, the water, the lifestyle also. Skateboarding also evolved from surfing in the 1950’s and was called “Sidewalk surfing”. So it was very appropriate to add some surfing FLAVOUR to my design. I was inspired by the barrel surfers went through and so i wanted to incorporate this in to my form design somehow. I want to achieve the same feeling surfers get as they are riding through a “barrel”- a big wave.

I also want it to have that aesthetic of an old drain pipe. Skaters like to find spots that aren’t meant to be skated. That’s what makes it an authentic street skate.  So check these following images and i’ll let the design speak for itself.

Barrel Wave

Barrel Wave

http://escapetheokiezone.com/uploaded_images/barrel-736497.jpg

Drain Pipe Skate

Drain Pipe Skate

http://images.google.com.au/imgres?imgurl=http://www.power-skate.com/skate05/images/stories/2006/JoshEvin_FullPipeTransfer.jpg&imgrefurl=http://www.power-skate.com/skate05/index.php%3Foption%3Dcom_content%26task%3Dview%26id%3D79%26Itemid%3D45&usg=__jo9-RBXkGNLxcv_Dg74pvXa9wjQ=&h=548&w=670&sz=92&hl=en&start=14&um=1&tbnid=Zut4Wepb0RUk_M:&tbnh=113&tbnw=138&prev=/images%3Fq%3Dfull%2Bpipe%2Bskating%26hl%3Den%26sa%3DG%26um%3D1

Air dry clay & wire mesh backing

Air dry clay & wire mesh backing

blog clay2

blog clay3